Klafs 18029 Manuel De Service page 15

7. System settings
7.1. Service menus
)* With SANARIUM controller 18033/18040 with function.
)* With Sauna controller 18029/18040 without function (changes to these values are not applied).
No. Menu
(01) CODE Code number
02 VERS Software version
03 PUR SaunaP
UR
04 )* CO- 1 Humidity sensor
05 TIME Bathing time
06 )* OFEU Humidity offset
07 OTEM Temperature offset
08 LT Output detection
09 )* DRY Final drying interrupted
10 ERRO Display error
11 ECLR Clear error
12 T_NE Hours connected to power
13 T_BE Operating hours
14 TSAU Sauna mode operating hours
15 )* TSAN SANARIUM mode operating hours
16 T_OF Heater operating hours
Input
7452
0 = Disable SaunaP ,
UR
1 = Enable SaunaP FAI3,
UR
2 = Enable SaunaP FAI 4/FAI 5
UR
3 = Gas sauna heater control algorithm
C0/C1
01 hr, 03 hr, 04 hr, 06 hr, 12 hr, 18 hr
3
±10 g/m
±5 °C (limiter)
0 = Deactivated/1 = Activated 60 °C/2 = Activated 75 °C)*
0 = Do not clear error, 1 = Clear error
Display (example)
V 02.04
00 08
1 095
00 95
00 34
00 23
00 11
00 32
Continued on the next page