Publicité
Les langues disponibles
Les langues disponibles
Sauna/SANARIUM
8.
If something does not work
8.3.
InfraPLUS error codes
Error code
1
2
3
4
5
50701290/12.14
Cause
HFT sensors missing or
defective.
Emergency-off bridge is
open.
The safety temperature limiter
has been triggered.
Basic heat sensor is missing
or defective.
CRC checksum error in the
parameters.
.
The parameters will be
restored to factory
settings.
Remedy
Install and connect HFT sensors.
Replace HFT sensors if they are defective.
Close the emergency-off bridge.
Inform Klafs customer service.
Install and connect the basic heat sensor.
Replace the basic heat sensor if it is
defective.
Switch off the mains switch for the controller,
wait for a short time and then switch it back
on again.
If there is no technical problem, the error is
reset.
If the controller continues to display the error,
contact Klafs service engineers.
PAGE 37
Publicité
