Xylem Lowara GEM Traduction De La Notice Originale page 97

8.3.3 PIN code access
The SETUP and COMMANDS menus can be accessed with two levels:
• User level, to reset the recorded values and change some settings
• Advanced level, to change all the settings.
PIN Unlocking
1. Press  to access the main menu.
2. Press ▲ or ▼ to select the PIN icon.
3. Press  to access the ENTER PASSWORD page.
4. Enter the 4 digits of the PIN, pressing ◄ or ► to switch between digits and ▲ or ▼ to
5. Press ◄ or ► to select
6. Press  to confirm.
GEM, GEMJ – Fire-fighting Pump Set
1. Commands menu
2. Setup
3. System information
4. PIN
5. Main page
6. Electrical measurements
7. Motor power
8. Start-up
9. Counters
10. Alarm status
11. Input and output status
12. Event list
increase or decrease the value.
.
en – Original Instructions
97