Porsche Mobile Charger Plus Mode D'emploi page 56

Tools required
Tools required
– Spirit level
– Power or hammer drill
– Screwdriver
54
Installing
Installing the wall mount
Installing the basic wall mount
Fig. 26: Drilling dimensions
1. Mark the drill holes on the wall.
2. Drill the mounting holes and insert wall plugs.
3. Press the basic wall mount 2 (Fig. 26) into the
cable guide1 (Fig. 26) from the front.
4. Screw the basic wall mount onto the wall.
Installing the connector fastener
Fig. 27: Distance between wall mount and connector
fastener
When installing the connector fastener, ensure a dis-
tance of 200 mm from the basic wall mount.