Abus TERXON M Instructions D'installation page 124

You have now made all settings in the programming menu.
Exit the programming menu by entering 099 and confirming
with . You are now in the user menu.
UK
We now add two users to the system. The first user (BERND) is
to activate and deactivate the system by entering a code, the
second (ANNA) using a chip key.
In the user menu, enter the administrator code 1234.
Now enter 4 on the keypad. The control unit shows:
Enter the user number of User 2. This is: X002. Press
The display shows:
Now change the name on the keypad – in this case, BERND.
Press the Enter key .
You are now asked to enter a new code in the system.
Enter 1111 (for example) and confirm with
for activating and deactivating the alarm system.
In the next step, we add User Anna, who is to activate and
deactivate the alarm system using a chip key. In the user
menu, enter the administrator code (1234) followed by 4.
You see the following:
Enter the user number of User 3. This is: X003. Press
The display shows:
Now change the name to ANNA and press the Enter key
. The display shows:
28
.
. This code is
.