Vue D'ensemble Des Possibilités De Combinaison De L'option Gxx Avec Hxx Et Qxx - Siemens SINAMICS S120 Manuel De Configuration

Vue d'ensemble des possibilités de combinaison de l'option Gxx avec Hxx et Qxx
Description of options
G11
Foot-mounted, solid shaft with fitted key
G13 Footed-mounted, hollow shaft with keyway
(insertion gearbox side 4)
G14 Footed-mounted, hollow shaft with shrink disk
(insertion gearbox side 4)
G15 Foot-mounted, solid shaft with fitted key
(gearbox side 3)
G17 Footed-mounted, hollow shaft with keyway
(insertion gearbox side 3)
G18 Footed-mounted, hollow shaft with shrink disk
(gearbox side 3)
G21 Tapped hole group, solid shaft with keyway
(gearbox side 4 for bevel and worm)
G23 Tapped hole group, solid shaft with keyway
(insertion gearbox side 5 for offset shaft,
insertion gearbox side 4 for bevel and worm)
G24 Tapped hole group, hollow shaft with tensioning
element (shrink disk on gearbox side 6 and inser-
tion side 5 for offset shaft; shrink disk on gearbox
side 4 and insertion side 3 for bevel and worm)
G25 Tapped hole group, solid shaft with fitted key
(gearbox side 3)
G27 Tapped hole group, hollow shaft with fitted key
(insertion gearbox side 3)
G28 Tapped hole group, hollow shaft with tensioning
element (shrink disk on gearbox side 3 and inser-
tion side 4 for bevel and worm)
G31 Flange (round), solid shaft with fitted key
(gearbox side 5 for offset shaft;
side 4 for bevel and worm)
G33 Flange (round), hollow shaft with keyway
(insertion gearbox side 4)
G34 Flange (round), hollow shaft with tensioning ele-
ment, shrink disk on gearbox side 6 and insertion
side 5 for offset shaft; shrink disk on gearbox side
4 and insertion side 3 for bevel and worm)
G35 Flange (round), solid shaft with fitted key
(gearbox side 3)
G37 Flange (round), hollow shaft with keyway
(insertion gearbox side 3)
G38 Flange (round), hollow shaft with tensioning ele-
ment (shrink disk on gearbox side 3 and insertion
side 4 for bevel and worm)
1)
Not for worm gear size S002 (E0x).
Moteurs synchrones 1FK7
Manuel de configuration, (PFK7S), 12.2006, 6SN1197-0AD16-0DP1
9.3 Moteurs avec réducteurs coaxial et angulaire
Gear type
Helical Offset Bevel Worm
shaft
Order code for option Gxx
Permissible H options
Permissible Permissible
H option for H option for
helical offset shaft
Order code for option Hxx
H1x to H4x
1)
H1x, H6x, H8x
1)
H1x to H6x
1)
1)
1)
1)
1)
H1x, H5x, H6x H1x to H6x
1)
1)
1)
1)
1)
Qxx:
New options, torque bracket
H2x:
Construction type IM B7 for helical gearboxes
Réducteur
Permissible
H option for
bevel and
worm
H1x to H6x
H1x to H6x,
Qxx
H1x to H6x
H1x to H6x,
Qxx
H1x to H6x
237