Icons Chart; Getting Started - Fagor LUX LCD Manuel D'utilisation

Icons Chart

The icon appears when the lid is properly
closed and locked. For any function except
Brown, Sauté and Slow Cook, the lid needs
to be fully closed. After pressing START/
Close Lid
STOP to begin cooking, the icon disappears.
If the lid is off, the unit will beep and the icon
will change from open to close to let you
know to close the lid.
The icon appears when the lid is open or
removed. For the Brown and Sauté functions
the lid needs to be completely off the
unit. After pressing START/STOP to begin
Open Lid
cooking, the icon will disappear. If the lid is
closed, the unit will beep and the icon will
change from close to open to let you know
to remove the lid.
The CUSTOM setting is used to program an
individual pressure level/temperature and
time in the functions: Pressure Cook, Slow
Cook, Brown, Sauté and Grains. Select F1,
F2 or F3 by turning the dial and confirm by
Favorite Menu
pressing the dial. Next, select the desired
pressure level and time and press the dial
to confirm. Press the START/STOP button
to begin cooking. The unit will automatically
save the settings for the selected function.
Indicates that the buttons are locked. To
Lock Button unlock them, press and hold the PANEL
LOCK button.
Indicates that the buttons are unlocked. To
lock them, press and hold the PANEL LOCK
Unlock Button
button.
After the setting is chosen, the icon blinks
to let you know to press the START/STOP
Press Start
button to begin cooking. Once the cooking
process starts, the icon will disappear.
Indicates that the KEEP WARM function is
Keep Warm
on.
Indicates that the unit is building pressure or
Preheat
temperature.
8

Getting Started:

Before First Use
Read the safety instructions found in this manual before plugging in and
operating the unit. Before using the multi-cooker for the first time, follow
these steps:
1. Remove all packing materials and literature from inside the Fagor LUX™
LCD Multi-Cooker. Lift out the removable cooking pot and remove any
pieces of paper from under it. Remove the plastic protection from the
control panel and any stickers from the stainless steel body.
2. Wash all removable parts in warm soapy water. Rinse and dry all parts
thoroughly. Wipe the stainless steel outer housing with a clean damp
cloth. NEVER submerge the stainless steel outer housing in water or any
other liquid. Only the removable cooking pot is dishwasher safe.
3. To clean the pressure regulator knob, gently push the pressure regulator
knob down and turn it counterclockwise past STEAM to the CLEAN
setting. Once the dot on CLEAN is aligned with the dot on the base of the
pressure regulator, you can lift the pressure regulator up and out of the
housing. Look through the holes of the pressure regulator to make sure
there is nothing obstructing the pressure stream, then clean the pressure
regulator knob with warm soapy water, allowing the water to run through
the pressure regulator to remove all particles.
4. To put the pressure regulator back into the lid, simply align the CLEAN
setting with the dot on the base, gently push down on the pressure
regulator and turn the knob clockwise until it slides back into place.
5. Make sure the silicone gasket is placed properly inside the lid or else the
cooker will not function properly.
6. After thoroughly drying all parts, place the removable cooking pot back
into the multi-cooker before cooking.
9