Motor Mounting; Battery Installation; Battery Requirement - Suzuki DF100A Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 58

MOTOR MOUNTING

 WARNING
Overpowering your boat can be hazardous.
Excessive horsepower will have an adverse
effect on hull safety and may cause operating/
handling difficulties. The boat may also sus-
tain stress and hull damage.
Never install an outboard motor with horse-
power exceeding the manufacturer's recom-
mended maximum horsepower listed on the
boat's "Certification Plate". Contact your
authorized Suzuki marine dealer if you are
unable to locate the hull "Certificate Plate".
Suzuki strongly recommends that you have
your outboard motor, controls and gauges
installed by an authorized Suzuki Marine
Dealer. He has the tools, the facilities and the
know-how.
 WARNING
Failure to have your outboard motor and asso-
ciated controls and gauges properly installed
can result in personal injury or damage.
Suzuki strongly recommends that you have
your outboard motor, controls and gauges
installed by your authorized Suzuki marine
dealer. He has the tools, the facilities, and the
know-how to do the job correctly.
All manuals and user guides at all-guides.com

BATTERY INSTALLATION

BATTERY REQUIREMENT

Choose a 12 Volt cranking-type lead acid bat-
tery that meets the specifications shown below.
NOTE:
• The specifications listed above are the mini-
• Additional electrical loads from the boat will
• Dual-purpose (Cranking/Deep-cycle) batter-
• Do not use a Deep Cycle battery for the main
• The use of Maintenance-Free, sealed, or Gel-
• When connecting batteries in parallel, they
650 Marine Cranking Amps (MCA)/ABYC,
or 512 Cold Cranking Amps (CCA)/SAE
or 160 Reserve Capacity (RC) Minutes/SAE
or 12 Volt, 100 AH
mum battery rating requirements for starting
the engine.
require larger capacity batteries. Consult
your Suzuki dealer to determine the proper
battery sizing for your boat and engine com-
bination.
ies can be used if they meet the minimum
specifications listed above (MCA, CCA, or
RC).
cranking battery.
Cell batteries is not recommended because
they may not be compatible with Suzuki's
charging system.
must be of the same type, capacity, manufac-
turer, and of similar age. When replacement
is necessary, they should be replaced as a
set. Consult your Suzuki dealer for proper
battery installation information.
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Df115aDf140a

Table des Matières