6.6.6 - Embrayage PdF - Vérifier le jeu
1. Desserrer l'écrou (1).
2. Retirer l'axe (2) de la fourche (3).
3. Régler le levier de la PdF (4) vers la gauche
jusqu'en fin de course (le roulement de la PdF est
au contact).
4. En maintenant le levier de la PdF (4) en position,
tourner la fourchette (3) de manière que l'orifice
de la fourchette soit aligné sur l'un des orifices du
levier de la PdF (4).
Ensuite, tourner la fourchette (3) de 1,5 tours pour
détendre la tige (5).
5. Monter l'axe (2) pour relier la tige (5) sur le levier
(4).
revision 0 date: 07/19 doc. AG525990
6.6.6 - Clutch & PTO Clutch - Check free play
1. Loosen the nut (1).
2. Remove the pin (2) from the yoke (3).
3. Move the PTO lever (4) to the left until it meets
the stroke end position (PTO bearing is in contact
with the PTO clutch fingers).
4. Keeping the PTO lever (4) in position, turn the
yoke (3) so that the hole of the fork (3) is aligned
with the one of the PTO lever (4).
Starting from this point, turn the fork (3) by 1.5
rotations to extend the rod (5).
5. Fit the pin (2) to connect the rod (5) to the lever
(4).
6
pag. 37