Fronius Profibus Instructions De Service page 47

General
Safety
Danger due to incorrect operation and incorrectly performed work.
Serious injury to persons and damage to property may result.
▶
▶
▶
▶
▶
Basics Profibus is a manufacturer-independent open field bus standard, used in many
different applications in manufacturing, process and building automation. Profi-
bus is suitable for rapid, time-critical data transmission, as well as extensive and
complex communication tasks.
Machine concept Profibus is characterised by its small footprint and high degree of modularity.
The fact that it can simply be fitted to a standard C-rail (thus saving space) and
employs direct cabling of actuators and sensors without any interconnections
between the terminals makes installation very straightforward. The uniform la-
belling concept further simplifies the installation.
Interface con-
nections - TS/
TPS, MW/TT ran-
ge
WARNING!
All activities described in these operating instructions must only be carried
out by trained and qualified personnel.
All functions described in these operating instructions must only be used by
trained and qualified personnel.
Do not carry out any of the work or use any of the functions described until
you have fully read and understood the following documents:
these operating instructions
all the operating instructions for the system components, especially the
safety rules
(2)
(1) Strain-relief device with cable
glands
for the Profibus data line and
the power supply for the field
bus coupler
(2) LocalNet connection
for connecting the interconnec-
ting hosepack.
(1)
47