Headlight Adjustment; Rear Shock Absorber Adjustment - Sym MAXSYM TL 500 Manuel D'utilisation

NOTE :
• Make sure to keep dust or foreign objects from entering the air cleaner during inspection.
• The dust groove must be cleaned before installing the air cleaner element.
• Use SYM genuine air filter element to ensure the engine performance.

Headlight Adjustment

The headlight aim can be adjusted for proper alignment. Use a Phillips screwdriver to adjust the low beam
vertical adjuster ○,
A
authorized SYM dealer.
NOTE :
• Obey local regulations for headlight aiming adjustment.

Rear Shock Absorber Adjustment

This scooter is equipped with a position-free spring preload adjustable rear shock absorber. To adjust the
preload setting, follow the below steps.
 Set the scooter up right with the main stand.
 To set the spring harder, turn the adjuster ○,
increase preload. After setting up the spring, turn the fixer ○,
 To set the spring softer, first turn the fixer anti-clockwise to release, turn the adjuster anti-clockwise ○,
with the C-spanner in the tool kit to decrease preload, then turn the fixer clockwise to lock the spring.
NOTE :
• Do not exceed the adjuster's limit.
• Be sure to lock the spring with the fixer after setting up the preload.
or the hi beam vertical adjuster ○,
○
,B
. Headlight aiming should be performed by an
B
○
,A
○
,B
clockwise ○,
A
○
,b
○
○
○
,A
46
with the C-spanner ○,
a
clockwise to lock the spring.
B
,a
,C
in the toll kit to
C
b