Sym MAXSYM TL 500 Manuel D'utilisation page 14

Function screen layout
Theme 1 is used for layout description in this section.
RPM
This tachometer shows the engine speed in revolutions per minute (rpm). Do not operate the engine in
the red zone. The current fuel consumption level is shown in kilometers/liters (km/l); the light bar varies
with the current fuel consumption. Your style of riding can be adapted to the desired fuel consumption. If
the scooter is stationary, "0.0" will be shown in the display area.
Speedometer
The speedometer shows the current vehicle speed in kilometers/hour (km/h), the reading synchronizes
with the multi-function meter's speedometer. The current fuel consumption level is shown in
kilometers/liters (km/l); the light bar varies with the current fuel consumption. Your style of riding can be
adapted to the desired fuel consumption. If the scooter is stationary, "0.0" will be shown in the display
area.
Clock
This function screen displays one digital and one alternative style. This clock displays only 12-hour mode.
To set the clock, do the below steps:
 Turn the ignition switch on, push and hold M button, the hour display starts blinking. Push the S button
to adjust the hours.
○
,A
○
,B
A. Clock
B. Tachometer
C. Current fuel consumption
○
,a
a. Red zone
○
,C
○
,A
A. Clock
○
B. Speedometer
,B
C. Current fuel consumption
○
,C
○
,A
A. Digital style
○
B. Alternative style
,B
13