Side Stand/Parking Brake - Sym MAXSYM TL 500 Manuel D'utilisation

The tool kit is stored in the luggage box, keep the tool kit in the luggage box.
 10 × 12 mm open end wrench
 C-spanner
 Slotted/Phillips screwdriver
 Screwdriver handle
 Extension bar
 3 mm Hex key
 T20 Star key
NOTE :
• Do not exceed the maximum weight limit.
• The luggage box may affected by engine heat. Do not put in valuables, food or objects are flammable or
susceptible to heat damage.
• Take away valuables before leaving the scooter.
The helmet hooks ○,
NOTE :
• Riding with helmets attached to the hooks can cause accidents, remove helmets from the helmet hooks
before riding.

Side Stand/Parking Brake

This scooter is equipped with a connective side stand system ○,
scooter. The rear wheel is locked after kicking down the side stand. This scooter is equipped with a side
stand switch ○,
. When the side stand is kicked down, the parking brake indicator goes on (page 11). The
B
engine cannot be started when the side stand is kicked down. The engine will be stopped when kicking
down the side stand while the engine is running.
which are located under the seat are designed for securing helmets.
A
○
,A
○
,A
○
27
,B
. The side stand is used for park the
A