Sym MAXSYM TL 500 Manuel D'utilisation page 46

 Remove the 2 screws ○,
 Remove the 2 screws ○,
 Carefully pull the front left cover outward, take care of the 3 tenons ○,
 Remove the 5 screws ○,
 Clean the dust groove ○,
 If the air cleaner element is damaged or too dirty, have it changed by a SYM authorized dealer.
 To install the element, do in the reverse order of the above instructions.
This scooter is equipped with 2 V-belt air cleaner elements. Have the v-belt air cleaner elements inspected
or replaced by an authorized SYM dealer.
on the rear side of the front right cover.
A
and the 2 plastic nuts ○,
A
○
○
,A
,B
to remove the air cleaner element ○,
B
○
,C
with a wet cloth after removing the air cleaner element.
A
○
,A
.
B
○
.
C
○
,A
○
○
,A
45
,A
.
A
,B