Sym MAXSYM TL 500 Manuel D'utilisation page 19

Trip meter
This trip meter shows the distance in kilometers since it was last reset to zero.
 In trip meter mode, push and hold S button to reset trip meter.
 Display range: 0~999.9 km.
NOTE :
• When the figures come to 999.9, they will return to 0 and the trip meter starts working again.
• This trip meter only shows in kilometers.
Oil distance meter
This meter records how long the engine oil is used. The oil check indicator (page 10) goes on at every
1,000km riding distance according to this oil distance meter. When the oil check indicator goes on, please
check the oil level in the oil level inspection window (page 33).
 In oil distance mode, quickly push S button twice to reset the oil distance meter.
 Display range: 0~9999.9 km.
NOTE :
• If the oil distance meter is not reset, the oil check indicator will go on permanently until it is reset.
• If the oil distance meter is not reset, when the oil distance exceed the maximum limit 9999.9 km, the
meter will return to 0 km and continue adding up values. In this condition, the oil check indicator light will
not go off until it is reset.
• This oil distance meter only shows in kilometers.
Battery voltage gauge
The battery voltage display shows current battery voltage.
 Display range: 8~16 V.
NOTE :
• If the battery voltage is below 12.0V when the ignition switch is turned on, and the engine is hard to start
or cannot be started, have your scooter checked by an authorized SYM dealer.
• If the battery voltage is below 12.0V or above 15.5V when the engine is running, have your scooter
checked by an authorized SYM dealer.
18