Coolant Change; Brake System Inspection - Sym MAXSYM TL 500 Manuel D'utilisation

Coolant Change

Contact an authorized SYM dealer to have the coolant changed.
It is highly recommended to use "SYM Long Life Coolant" or equivalent products when filling or changing
coolant. "SYM Long Life Coolant" is premixed and contains a 50% solution of ethylene glycol based
antifreeze, and does not need to be diluted before topping up or changing. "SYM Long Life Coolant" is
also contains corrosion inhibitor to protect the cooling system.
 Coolant capacity: 1.3 liters.
Please refer to the below list of antifreeze concentration.
Antifreeze concentration

Brake System Inspection

This scooter is equipped with a disk brake system on the front wheel and the rear wheel. If there is
something wrong when applying the brakes, have the brake system checked by an authorized SYM dealer.
Front / Rear Brake Fluid Level Inspection:
 Set the scooter upright.
 To inspect the right brake fluid reservoir, turn the handlebar to the left. To inspect the left brake
reservoir, turn the handlebar to the right.
 Check the brake fluid level in the front / rear brake fluid reservoir ○,
 With the front brake reservoirs held horizontal, the brake fluid level in the inspection window must be
above the "L" line ○,
 If the brake fluid level is below the lower level, contact your SYM authorized dealer to adjust the fluid
level.
Recommended brake fluid
DOT 4.
NOTE :
• Brake fluid may harm painted surfaces and plastic parts. Spilled fluid must be cleaned up immediately.
• Refill with the same type of brake fluid.
20%
30%
40%
50%
.
A
○
Temperature
-8
-15
-24
-36
,A
○
,a
37
Remark
To ensure antifreeze
performance, the original
equipped coolant has
50% of antifreeze.
.
A