Publicité
FRONT SUSPENSION
4. Inspect:
S Spring
Wear/cracks/damage ! Replace.
5. Measure:
S Spring free length a
Out of specification ! Replace.
Spring free length limit:
235.0 mm (9.25 in)
6. Inspect:
S Oil seals
Damage ! Replace.
ESS00114
INSTALLATION
1. Lubricate:
S Bushing (suspension support 1 )
S Bushing (suspension arm 2 )
S Oil seal lips 3
Recommended grease:
ESSO beacon 325 grease or
Aeroshell grease #7A
2. Install:
S Suspension arm
CAUTION:
Always use a new circlip.
NOTE:
Install the suspension arm so the "L" mark is on
the left side and the "R" mark is on the right side.
3-10
CHAS
Publicité
