Publicité
ENGINE COOLING FAN
ESS00176
INSTALLATION
1. Install:
S Seal rubber 1
S Cooling fan housing 2
S Engine mounting bracket 3
S Starter motor 4
2. Install:
S Fan belt 1
S Fan belt drive pulley 2
S Starter pulley 3
NOTE:
Attach the universal rotor holder 4 to hold the
starter pulley.
Universal rotor holder:
90890-01235, YU-01235
3. Measure:
S Cooling fan belt deflection.
Out of specification ³ Adjust.
Refer to "COOLING FAN BELT INSPEC-
TION" in CHAPTER 2.
Cooling fan belt deflection:
8 mm (0.31 in.)/4 X 6 kg
(8.8 X 13.2 lb)
4. Install:
S Recoil starter 1
5. Install:
S Cooling fan cover 1
S Seal rubber stay (air duct) 2
S Cylinder air shroud 3
5-26
ENG
Publicité
