Publicité
STARTER (CHOKE) CABLE FREEPLAY ADJUSTMENT/
EXHAUST SYSTEM INSPECTION
ESS00050
STARTER (CHOKE) CABLE FREEPLAY AD-
JUSTMENT
1. Pull back the starter cable outer tube 1 .
2. Measure:
S Starter cable freeplay a
Out of specification ! Adjust.
3. Adjust:
S Starter cable freeplay
Adjustment steps:
S Pull back the adjuster cover 1 .
S Loosen the locknut 2 .
S Turn the adjuster 3 in or out until the specified
freeplay is obtained.
Turning in ! Freeplay is increased.
Turning out ! Freeplay is decreased.
S Tighten the locknut and push in the adjuster
cover.
ESS00053
EXHAUST SYSTEM INSPECTION
1. Remove:
S Springs
Refer to "EXHAUST ASSEMBLY" in CHAP-
TER 5.
2. Inspect:
S Exhaust joint 1
S Exhaust pipe 2
S Exhaust silencer 3
Cracks/damgae ! Replace.
S Exhaust gaskets 4
Exhaust gas leaks ! Replace.
3. Check:
S Tightening torque
4. Install:
S Springs
Refer to "EXHAUST ASSEMBLY" in CHAP-
TER 5.
2-12
INSP
ADJ
Starter cable freeplay a :
0.5 X 1.5 mm (0.02 X 0.06 in)
Bolt (exhaust pipe joint):
30 Nm (3.0 mSkg, 22 ftSlb)
Publicité
