Peb 2X60 Operation - Frigomat PEB 30 Manuel D'utilisation Et D'entretien

5.2.2 PEB 2X60 OPERATION

2. prepare the mixture in B, then press the desired pasteurization pushbutton on the
pushbutton panel located on this tank (or the SEMI-AUTOMATIC cycle), which
intermittently lights up to show that tank B is in STAND-BY.
3. when tank A has reached the programmed temperature and started up the cooling
phase, the selected pasteurization cycle led in tank B will light up and remain fixed,
to show the beginning of the heating cycle for tank B, while tank A continues
cooling.
4. when tank A has completed the pasteurization cycle (or AUTOMATIC cycle), the
compressor and the mixer in tank B keep on working until the selected cycle for this
tank is completed
17 - ENGLISH
The machine is equipped with two microprocessor and
two pushbutton panels, one for each tank. Working with
a single tank, PEB2X60 operation is the same as PEB
60.
Working with two tanks, it is necessary to proceed as
follows:
1. prepare the mixture in tank A, then press the selected
pasteurization cycle (or the SEMI-AUTOMATIC cycle), to
start up the AUTOMATIC cycle;
.