Frigomat PEB 30 Manuel D'utilisation Et D'entretien page 33

FRIGOMAT s.r.l. declines any liability for damages to persons and/or things due to a
wrong installation and/or the non-compliance with the industrial accident prevention
standards. Never touch the machine with hands, both when it is on duty and during
cleaning and maintenance operations, without making sure that the machine has been
stopped by means of pushbutton 10 STOP and the master switch has been turned off.
Never clean the machine by means of high pressure jets of water. Never close the cut-off
cock while the machine is running. Pay attention not to damage the feeder. In case of
necessity, make it be replaced.
In case the machine provided with water-cooling is left at a room temperature inferior to
0°C, it is necessary to run off all water present inside the condenser before starting up the
machine.
9 - ENGLISH
• Press pushbutton 10 STOP to stop the machine.
• In case the sense of rotation is not clockwise,
remove voltage and exchange the two wires of the
feeder between themselves.
• The ideal temperature shall range between 15°
and 35°C;
• The ideal humidity shall range between 30 and
60%.