3. INSTALLATION
3.1 FIELD OF USE
Equipment suitable to the preservation and low and high pasteurization of food mixture for
ice-cream for appropriate legal purposes.
3.2 LIMITS OF USE
Never use the machine with variable supply voltage and/or more than +/- 10% of the value
showed in the nameplate or when the feeder is damaged;
Do not use the machine for purposes different from the ones indicated in the present
manual;
Do not use the machine in explosive environment;
Do not wash the machine with high-pressure jets of water or poisonous substances;
Do not expose the machine to excessive heat or humidity;
Do not use completely unbalanced mixtures and/or quantities not in compliance with the
specifications reported on the packing.
3.3 MACHINE OUTFIT
-
Disk wheel
-
Cleaning rod
-
Gasket dismantling tool
-
Stiff paddle
-
Packing screw
-
Packing washer
-
Flat packing washer
-
Cock O-Ring 3112
3.4 COMMISSIONING
Bring the machine to the place of employment and check that everything is all right as far
as installation concerns:
D. Power supply;
E. Water supply (only in case of water condensing);
F. Suitable run-off pit for water (only in case of water condensing).
• Lock the machine by means of the apposite lever located on the front wheels;
• Place the machine far from walls or other obstacles (at least 10 cm sideways and 30 on
the back). In case the machine is provided with water-cooled condenser, the distance
between the wall and the back panel can be reduced to 10 cm.
• Make sure that the supply voltage and power comply with the values reported on the
rating plate placed on the back panel;
• Connect the machine to the mains; upstream the machine, arrange an omnipolar
master switch with minimum contact opening equal to 3 mm and adequate power,
interlocked with fuses to allow plugging and unplugging at open circuit.
• Connect the feeder to a type-approved plug: the feeder shall be well stretched, to avoid
rolling and overlapping. It shall not be exposed to possible shocks or tampering
7 - ENGLISH
-
Cock O-ring 3075
-
Cock O-ring 121
-
Cock O-ring 4087
-
Pivot O-ring 2018
-
FRIGOMAT lubricant
-
Use and maintenance manual
-
Declaration of conformity
-
Certificate of guarantee