General Notes - Rizzoli ST Série Manuel D'utilisation

1.5 RECOMMENDED COMBUSTIBLES
ST serie Thermal cookers are built to use
wood for burning. We recommend to use
good quality wood, dry, seasoned (main-
tained for two years in ventilated places an
repaired from rain) and possibly broken.
Using good quality wood is warranty of
good heating power and avoid the forming
of carbon residuals.
1.6 OTHER COMBUSTIBLES
Other combustibles and refuses, for exam-
ple plastic, enamelled or treated wood or
carton must not be burned. Using this ma-
terials cause serious damage not only to en-
2.1

GENERAL NOTES

ST thermal cookers must be installed by
experienced people according to technical
laws UNI 10683 and UNI 10412-2. In par-
ticular it is important to pay attention to
the connection to an appropriate heating
system and to the chimney, which must be
suited and dimensioned according to the
device.
For ST 90 must also be done the connection
to AC power in order to make the oven light
working. When placing the thermal cooker,
you must pay attention to prevent damag-
es. Do not drag the thermal cooker, move it
keeping it lifted from the floor. The thermal
cooker must not be moved making effort on
the handrail or on the handles. For thermal
cookers to be enclosed, be sure to main-
tain the minimal safety distances in case of
Model
ST 60
ST 90
Table 1 - Safety distances from inflammable or sensible to temperature materials.
2. INSTALLATION
Sideways Rear
30 cm 32 cm
35 cm 33 cm
To avoid dissipation of energy and eventual
deforming and damaging processes you
must not use excessive combustible, follow
strictly what is written in the technical data
in chapter 7.
vironment but also to thermal cooker and
chimney.
inflammable materials or sensible to high
temperatures as written in table 1. In case
of floor made of inflammable materials it is
necessary to put a fire-proof protection on
the floor in font of the fire door. The protec-
tion must extend for a minimum of 50 cm in
front and for a minimum of 30 cm sideways
over the fire door.
If the cooker is framed between not sensible
to heating materials, it is necessary anyway
to keep a minimum distance of 1-2 mm to
allow the dilatation of the materials when
the temperature changes.
Front
80 cm
80 cm
61
Above
70 cm
70 cm