Setup Menu - GYS ARCPULL 350 Mode D'emploi

Operating manual

8.4.4. SETUP MENU

Press the G and G- keys to move the left cursor (Pre-gas, Post-gas, Language, Machine reset, Info.).
When the Pre-gas, Post-gas or Language items are highlighted, press the D and D- keys to modify their value.
Test Setting range
Pre-gas NoGas then from 0.2 s to 3 s
Post-gas NoGas or from 0.2 s to 3 s
Tongue FR, GB, DE, NL, ES, IT, UK
Press the back button
8.4.4.1. ResetMachine
When "Reset machine" is selected from the Configuration menu, pressing
sub-menu.
To push on for 3 s to validate the product reset.
Press back to return to the Configuration menu and cancel the product reset.
A reset of the ArcPull 350 will clear all weld configurations from the Program menu, revert the product to
French, and Pre-Gas and Post-Gas revert to 0.4s.
Translation of the original
instructions
Configuration
> Pregaz
Postgaz
Langue
Reset machine
Info
Remark
To weld under gas protection, it is advisable to have a pre-gas of at
least 0.4 s.
When welding is done under gas protection, it is recommended to
have a post-gas of at least 0.4 s.
to return to the Main Menu.
Reset machine
:3sec
pour valider
> 400ms
400ms
FR
returns the set to the machine reset
ARCPULL 350
59