Set Up - Acoustic Signal - SICE S 62 E Manuel D'instructions

- use the
is enabled)
- press the
-b- MM to activate the display in millimetres
or -b- in to activate the display in inches
- press the
15.9. SET UP – ACOUSTIC SIGNAL
The machine can be configured to beep each time a key is pressed on the keypad.
Proceed as follows to modify this configuration:
- press the
- use the
- press the
- use the
- press the
biP on to activate the beeper
or biP oFF to deactivate the beeper
- press the
S 62 E Operator's manual
keys to search for -b- in (-b- MM if the display in millimetres
key to change the setting:
key to confirm and exit.
key
keys to search for SEt UP
key to confirm
keys to search for biP on (biP oFF if the beeper is disabled)
key to change the setting:
key to confirm and exit.
111