Set Up - Selecting Vehicle Type (Car-Motorcycle) - SICE S 62 E Manuel D'instructions

Proceed as follows to access the configuration menu:
• press the
• use the
• press the
15.1. SET UP - SELECTING VEHICLE TYPE
Configuration used for enabling motorcycle wheel balancing functions.
Proceed as follows to recall this programme:
- press the
- use the
- press the
- use the
- press the
CAr on to activate the car working environment
CAr off to activate the motorcycle working environ-
ment
- press the
Warning
Proceed as follows to balance a motorcycle wheel:
- fit the motorcycle wheel adapter A on the wheel
balancer as shown in Fig. 21;
- remove the hub;
- insert the two screws that are supplied in the holes
on the wheel contact flange;
S 62 E Operator's manual
key
keys to search for SEt UP
key.
(CAR-MOTORCYCLE)
key
keys to search for SEt UP
key to confirm
keys to search for CAr on (or CAr oFF if previously set)
key to change the setting:
key to confirm and exit.
21
105