SICE S 62 E Manuel D'instructions page 89

- press the
- measure the width of the rim using the calliper provided (Fig. 12)
- modify the width value (-b-) displayed by pressing the
desired value is set.
The displayed values can be increased or decreased quickly by keeping the keys
pressed.
The width can be set in millimetres by changing the setting of the unit of measurement
in the machine's set-up menu.
- press the
entry (-d-)
- read the rated rim diameter value on the tyre
- modify the displayed diameter value by pressing the
read number is set
- press the
ous value and set the machine for distance
data entry (-A-)
- bring the distance measuring arm into
contact with the inner side of the rim (Fig.11)
- read the distance value between the wheel
and the body on the rule (A, Fig.13)
- modify the displayed distance value by
pressing the
the read number is set
S 62 E Operator's manual
button
key to confirm the previous value and set the machine for diameter
key to confirm the previ-
keys until
keys until the
keys until the
13
89