SICE S 65 Manuel D'instructions page 67

- temperature ranging from 0° to +50°C.
WARNING
For information concerning the technical features, warnings and maintenance instruc-
tions consult the related operator manuals provided with the documentation of the
machine.
WARNING
The machine must not be operated in potentially explosive atmospheres.
The machine is supplied partially disassembled and is to be assembled according to
the procedures described below.
Installing the head and LCD
monitor
- Remove the head rear closing plate (C,
Fig.3);
- Loosen the 4 screws M8 (A, Fig.3) that
fasten the head to the body on the rear
side without unscrewing them completely;
- Remove the head from the 4 fastening
screws pulling them first towards the
left and then towards the rear side of the
machine;
- Turn the head to a vertical position and
insert the 4 fastening holes on the M8
screws on the body (B, Fig.3a), making
sure that the previous loosened screws
do NOT touch the head itself;
- Tighten the fastening screws on which the
head is positioned;
- Unpack the monitor and fix it to the
mounting flange with the four screws
supplied with the machine (C, Fig. 3b);
- Connect the signal
out from below the rear panel of the
machine (F, Fig. 3c) to the monitor (F,
Fig. 3b), connect the power cable (G,
Fig. 3b) to the rear panel (G, Fig. 3c), and
feed these cables into the head;
- Refit the head backing plate removed
previously.
User manual S 65
cable leading
3
UK
3a
67