Side Cleats; Top View - Monogram ZKFN Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Design Guide - Flush Inset Installation for French Door
SIDE PANELS
Side panels must be used
whenever the sides of the
refrigerator will be exposed.
The 1/4
(0.63 cm) side
"
panels will slip into the
side case trim. Secure the
panels to the refrigerator
with stick-on hook and loop
fastener strips. Order the
side panels from the cabinet
manufacturer.
• Cut a notch in the top front
corner as shown to allow
clearance for corner keys
in the front side trim.
* Depending on installation height.
31-1000454 Rev. 0
Bottom Freezer Refrigerator
24"
3/16"
1-7/8"
*84"
*3" to 4"
2-9/16"

SIDE CLEATS

Wood cleats are required to be installed vertically down
both sides of the cabinet opening to provide depth stop
for the refrigerator when installed into the opening.
The cleat should be installed per the diagrams below
based on the type of panel being used.
Finished
Cleat
5-1/4"
Finished
Cleat
5-3/8"
13
TOP VIEW
DOOR
1/2"
3/4" Panel
Case Trim
TOP VIEW
DOOR
1/2"
1/2" Panel
Case Trim

Publicité

Table des Matières
loading

Table des Matières