Installation Instructions - Flush Inset Installation for
STEP 12 CONNECT POWER
• Check to be sure the power cord is plugged into the
receptacle.
Electrical Outlet
• Check to make sure power to refrigerator is on by
opening refrigerator door to see if interior lights are
on.
• The temperature controls are preset at 37°F
(-13.89°C) for the fresh food section and 0°F
(-17.78°C) for the freezer.
• Allow 24 hours to stabilize before making
adjustments.
STEP 13 START ICEMAKER
CAUTION
Avoid contact with the moving parts of
the ejector mechanism, or with the heating element
(located on the bottom of the icemaker) that releases
the cubes. Do not place fingers or hands on the
automatic ice making mechanism while the freezer is
plugged in.
ATTENTION
Évitez tout contact avec les pièces
mobiles du mécanisme d'éjection, ou l'élément
chauffant (situé dans le bas de la machine à glaçons)
qui libère les glaçons. Ne placez pas les doigts ou les
mains sur le mécanisme de production de glace
automatique lorsque le congélateur est branché dans
la prise électrique.
PRECAUCIÓN
Evite el contacto con las partes en
movimiento del mecanismo expulsor o con el elemento de
calefacción (ubicado en la parte inferior de la máquina de
hielo) que expulsa los cubos. No coloque los dedos ni las
manos en el mecanismo de la máquina de hielo automática
mientras el freezer se encuentre enchufado.
• The icemaker will
begin operation
automatically.
• Be sure nothing
interferes with the
sweep of the feeler
arm.
• Discard the first full
bucket of ice cubes.
• To turn the icemaker off, see Standard Installation.
31-1000454 Rev. 0
Bottom Freezer Refrigerator
Icemaker
Feeler
Arm
STEP 14 INSTALL TOEKICK
• Flush Installation toekicks are provided in Kit ZKFN.
• Locate inner and outer toekicks as indicated below.
Recycle all other toekicks.
• Attach the toekick assembly to the refrigerator using
the supplied screws (2).
• A custom toekick can be installed to match or
complement the surrounding cabinetry. Use the
supplied toekick as a template to cut the shape.
GG
IMPORTANT: A custom toekick can be installed to
match or complement the surrounding cabinetry but
can NOT cover the horizontal vent slots of the factory
toe kick.
39
F