1/2" (1.27 Cm) Overlay Panel Dimensions - Monogram ZKFN Instructions D'installation

Design Guide - Flush Inset Installation for
1/2" (1.27 cm) OVERLAY PANEL
DIMENSIONS
For a more custom appearance, overlay panels may be
installed on trimmed models. The overlay panel must be
secured to a 1/4" (.63 cm) thick backer panel which slides
into the trim. A spacer panel 0.10" (0.25 cm) thick must be
placed between the overlay and backer panel.
Assemble the panels with glue and screws:
• Center the spacer panel on the backer panel, left to right
and top to bottom. Secure the panels with glue.
• Refer to the following chart for locating the backer panel
to the overlay panel. Secure the overlay panel to the
backer panel with glue and screws. Screws must be
countersunk into the backer panel.
Hinge Side
Fresh Food/
Freezer Back
Backer with
Overlay Panel
Assembly
A
IMPORTANT NOTE: Maximum total
weight for the assembled panels:
•
Fresh food door panel – 75 lbs.
(34.02 cm)
•
Grille Panel – 18 lbs. (8.16 cm)
31-1000454 Rev. 0
Bottom Freezer Refrigerator
C
D
B
1/4" (0.63 cm)
Backer Panel
.10" (0.25 cm)
Spacer Panel
1/2" (1.27 cm)
Overlay Panel
Door
1/4"
Backer
Panel
.250" + .10" + .50" = .850" Total Panel Thickness
(0.635 cm + 0.254 cm + 1.27 cm = 2.159)
Grille Back
C
A
A
Door Panel 2-1/16"
(5.24 cm)
Drawer Panel 2-1/16"
(5.24 cm)
Grille Panel 2-1/16"
(5.24 cm)
Panel Dimensions
Fresh Food
46-1/16" x 33-7/8"
(116.99 cm x 86.04 cm)
44-11/16" x 32-1/2"
(113.51 cm x 82.55 cm)
49-9/16" x 38"
(125.89 cm x 96.52 cm)
25
1/2"
Overlay
Panel
.10"
Spacer
B
D
B C
2-1/16" 5/16" 3/16"
(5.24 cm) (0.79 cm) (0.47 cm)
2-1/16" 5/16" 3/16"
(5.24 cm) (0.79 cm) (0.47 cm)
2-1/16" 1-11/16" 3/16"
(5.24 cm) (4.28 cm) (0.47 cm)
Freezer
21-7/8" x 33-7/8" 8-7/8" x 33-7/8"
(55.56 cm x 86.04 cm) (22.54 cm x 86.04 cm)
20-1/2" x 32-1/2" 7-5/8" x 32-1/2"
(52.07 cm x 82.55 cm) (16.37 cm x 82.55 cm)
22-7/16" x 38 10-11/16" x 38"
(56.99 cm x 96.52 cm) (27.15 cm x 96.52 cm)
D
Grille