1/4" Framed Panel Dimensions; Side Panels - Monogram ZIP360NN Instructions D'installation

Design Guide - Standard Installation
1/4" (0.63 cm) FRAMED PANEL DIMENSIONS
If you choose to install framed panels, they must be
cut to the dimensions shown. The panels will slide
into the frame on the door, drawer and grille.
If the custom panel is less than 1/4" thick and if it fits
loosely in the door frame, it can be backed up with a
piece of filler material or foam tape to improve the fit.
Panel Dimensions
1/4" (0.63 cm) 46-1/16" x 16-1/2"
Framed Panel (101.76 x 41.91 cm)

SIDE PANELS

Side panels must be used whenever the sides of
the refrigerator will be exposed. The 1/4
side panels will slip into the side case trim. Secure
the panels to the refrigerator with stick-on hook and
loop fastener strips. Order the side panels from the
cabinet manufacturer.
• Cut a notch in the top front corner as shown to
allow clearance for corner keys in the front side
trim.
33-7/8" x 21-7/8" 33-7/8" x 8-7/8"
(86.04 x 55.56 cm) (86.04 x 22.54 cm)
* Depending on
installation height.
(0.63 cm)
"
10
Door
1/4"
Panel
NOTE: Maximum total panel weight:
• Fresh food door panel – 58 lbs. (26 kg)
• Freezer drawer panel – 28 lbs. (13 kg)
• Grille Panel – 11 lbs. (5 kg)
24"
*84"
*3" to 4"
2-9/16"
5/16"
Trim
Reveal
3/16"
1-7/8"
31-1000451 Rev. 0