Publicité
Chassis
•
•
•
•
•
Checking
•
•
•
•
Fitting
•
CHAS - 106
Downloaded from
www.Manualslib.com
Slide of the tapered bearing from the
case.
Slide off the O-ring.
Slide off the spacer.
Slide off the two shim washers.
Slide off the tapered bearing from the
case.
Check that the pinion toothing is not damaged, worn or deformed; otherwise, replace the
pair.
Check that both tapered bearings are not damaged, that the rollers are not damaged or
worn; otherwise, replace them.
Check that the adjustment washers are not deformed or broken; otherwise, replace them.
Check that the sealing rings are not shattered, spoiled or worn; otherwise, replace them.
If the bevel pinion should be replaced,
replace also the crown fitted on the
housing. The pinion and the crown
should have the same number stam-
ped.
manuals search engine
NEVADA 750
Publicité
Chapitres
