Télécharger Imprimer la page

MOTO GUZZI NEVADA 750 CLUB Mode D'emploi page 626

Publicité

NEVADA 750
DO NOT TOUCH THE THROTTLE ABUTMENT SCREW OR THE THROTTLE BODY MUST BE RE-
PLACED. CHECK THAT THE THROTTLE RETURN CABLE IS NOT TAUT.
Now, it is necessary to adjust idle speed:
Downloaded from
www.Manualslib.com
Turn the key to "OFF" and leave it for at least 30 seconds.
Start the engine.
Take the engine to the prescribed tem-
perature: 50 °C (122 °F).
Completely close the two by-pass
screws on the throttle bodies.
Take the engine to an out-of-idle
speed: 2000 - 3000 rpm.
Check cylinder compensation on the
vacuometer.
To correct compensation use the set
screw of the control rod of the throttle
bodies, on the left side of the vehicle,
until cylinders are compensated.
manuals search engine
Power supply
P SUPP - 77

Publicité

loading

Ce manuel est également adapté pour:

Nevada 750