Publicité
Chassis
•
•
•
•
•
•
Installing
•
•
•
•
•
CHAS - 102
Downloaded from
www.Manualslib.com
Check that the rubber bellows are not cut or pierced; otherwise, replace it.
Check that the swingarm pin threads and the swingarm fixing nuts are not damaged, de-
formed or flattened; otherwise, replace them.
Check that the sleeve grooves are not damaged, deformed or deteriorated; otherwise, re-
place the sleeve.
Check that the spring is not deformed; otherwise, replace it.
Check that the sealing ring (Seeger) is still flexible and is not deformed.
Check that the sleeve outer toothing and internal grooves are not damaged.
Insert the swingarm on the gearbox
cover.
Tighten thoroughly the pin on the left
side until the shimming washer on the
right side rests on the bearing fitted on
the gearbox cover.
Tighten thoroughly the pin on the right
side, without locking it.
Operate the swingarm and make sure
it oscillates freely without clearance.
Screw in the lock nuts on the pins, lock-
ing them thoroughly.
manuals search engine
NEVADA 750
Publicité
Chapitres
