Safety Information For The Installer - Sentiotec wave.com4 Instructions De Montage Et Mode D'emploi

Instructions for installation and use

2.2. Safety information for the installer

● The electrical connection may only be performed by a qualified
electrician or similarly qualified person. Please note that in the
event of a guarantee claim, a copy of the invoice issued by
the electrician performing the work must be presented.
● Work on the sauna controller may only be performed when the
power has been disconnected.
● A fully disconnecting all-pole isolating device compliant with
overvoltage category III must be fitted on site.
● The power unit of the wave.com4 11 kW (WC4-B-11) must be
installed in accordance with the technical data.
● The control unit can be installed inside or outside the sauna,
however it must be mounted according to the installation and
operating manual provided.
● Also comply with the regulations applicable at the installation
location.
● For your own safety, consult your supplier in the event of prob-
lems that are not explained in sufficient detail in the installation
instructions.
p. 7/38
EN