Connecting An External Main Switch; Connecting The Light; Connecting An External Light Switch; Connecting A Fan (Optional) - Sentiotec wave.com4 Instructions De Montage Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 78
Installation instructions, only for experts

5.4. Connecting an external main switch

The main switch is not included on delivery.
1. Guide the main switch connection cable through the bushing
the 230 V/400 V connection area
2. Connect the cable to terminal strip
for the switch.
The contacts are bridged on delivery. Remove the wire jumper for in-
stallation

5.5. Connecting the light

1. Guide the light cable through the bushing
tion area
.
1
2. Connect the light cable to terminal strip
for the switch.

5.6. Connecting an external light switch

The light switch is not included on delivery.
3. Guide the light switch connection cable through the bushing
the 230 V/400 V connection area
4. Connect the cable to terminal strip
for the switch.

5.7. Connecting a fan (optional)

1. Guide the fan cable through the bushing
tion area
.
1
2. Connect the fan cable to terminal strip
for the fan.
.
1
. Follow the operating instructions
b
into the 230 V/400 V connec-
7
. Follow the operating instructions
8
.
1
. Follow the operating instructions
9
into the 230 V/400 V connec-
i
. Follow the operating instructions
l
p. 19/38
into
a
EN
into
a

Publicité

Table des Matières
loading

Table des Matières