Burkert 8692 Guide Rapide page 34

13.3.1 Basic settings of the process
controller
→
In the main menu (MAIN) select the P.CONTROL function and
implement the basic settings.
M A I N
Main menu
P.TUNE
ADD.FUNCTION
P.CONTROL
EXIT 16 ENTER
P.CONTROL PID.PARAMETER
ENTER
EXIT
* The SP SCALE function is
indicated only if the external
set-point value default
(external) menu option is
activated under SP INPUT.
Fig. 21: Operating structure - basic settings for process controller
34
DBND 0.1 %
ENTER
KP
TN
TV
X0
FILTER
EXIT
SETUP PV-INPUT
ENTER
PV SCALE
SP-INPUT
SP-SCALE*
P.CO-INIT
EXIT
English
P.CONTROL - settings:
PID.PARAMETER Parameterization of the process controller
DBND 0.1 %
KP 0.00
TN 0.5
TV 0.0
X0 0.0 %
FILTER 0
0.00
SETUP
0.5
PV-INPUT
0.0
0.0 %
PV SCALE
0
SP-INPUT
SP-SCALE*
P.CO-INIT
Tab. 14: Basic settings of the process controller
The parameter settings can be created automatically with the
help of the P.TUNE function (description see "operating instruc-
tions for Type 8692/8693").
Type 8692, 8693
Start-up
Insensitivity range (dead band) of the PID
process controller
Amplification factor of the process controller
Reset time
Hold-back time
Operating point
Filtering of the process actual value input
Setting up the process controller
Indication of the signal type for process actual
value
Scaling the process controller
Type of the set-point value default
(internal or external)
Scaling the positioner (position controller)
(for external set-point value default only)
Enables a smooth switchover between
operating states AUTOMATIC and MANUAL