9
OPERATING LEVELS
There is the process level and the setting level for the operation and
setting of type 8692/8693.
Process level:
The running process is displayed and operated on this level.
Operating state: AUTOMATIC – Displaying the process data
MANUAL
Setting level:
The basic settings for the process
are made on the setting level.
If the device is in the AUTOMATIC operating state when
changing to the setting level, the process continues running
during the setting.
9.1
Switching between the operating
levels
Change to the setting level
Return to the process level
16
– Manually opening and closing
the valve
– Inputting the operating param-
eters
– Activating auxiliary functions
Press for
MENU
3 seconds
Press briefly
EXIT
English
Type 8692, 8693
Operatinglevels
10 INSTALLATION
Only for positioners and process controllers without
pre-assembled process valve.
10.1 Installation of devices for the Ex area
When installing devices in the explosion-protected area, observe the
"ATEX manual for use in the Ex area" enclosed with the Ex-devices.
10.2 Safety instructions
DANGER!
Risk of injury from high pressure in the system/device.
▶ Before working on the system or device, switch off the pressure
and vent/drain lines.
Risk of injury due to electrical shock!
▶ Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations
for electrical equipment!
WARNING!
Risk of injury from improper assembly!
▶ Assembly may be carried out by authorized technicians only and
with the appropriate tools!
Risk of injury from unintentional activation of the system and
uncontrolled restart!
▶ Secure system against unintentional activation.
▶ Following assembly, ensure a controlled restart.