Electrical Installation; Safety Instructions - Burkert 8692 Guide Rapide

Type 8692, 8693
Electricalinstallation
Exhaust air
port
Label: 3
Pilot air
port
Label: 1
Additional exhaust
air port
Label: 3.1
(only for Types 23xx and 2103 with pilot-controlled control system for a
high air flow rate from actuator size ø 125 / 130)
Fig. 12: Pneumatic connection
Procedure:
→
Connect the control medium to the pilot air port (1)
(3 ... 7 bar; instrument air, free of oil, water and dust).
→
Mount the exhaust air line or a silencer on the exhaust air port (3)
and, if present, on the exhaust air port (3.1).
11 ELECTRICAL INSTALLATION
There are 2 connection options for Type 8692/8693:
• Multi-pole with circular plug-in connector
• Cable gland with connection terminals
Signal values
Operating voltage:
Set-point value
(process/position controller):
Actual value
(only process controller):
11.1 Safety instructions
DANGER!
Risk of injury due to electrical shock!
▶ Before reaching into the system, switch off the power supply
and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations
for electrical equipment!
English
24 V DC
0 ... 20 mA; 4 ... 20 mA
0 ... 5 V; 0 ... 10 V
4 ... 20 mA;
frequency;
Pt 100
21