Burkert 8692 Guide Rapide page 30

X5 - M 8 circular connector, 4-pole
(process actual value) - only Type 8693
Input Wire
Pin Assignment
type ** color*
4 ... 20 mA 1 brown + 24 V supply Transmitter
- internally 2 white output of transmitter
supplied 3 blue GND
4 black bridge after GND
4 ... 20 mA 1 brown not assigned
- externally 2 white Process actual +
supplied 3 blue not assigned
4 black Process actual -
Frequency 1 brown + 24 V sensor supply
- internally 2 white Clock input +
supplied 3 blue
Clock input - (GND)
4 black not assigned
Frequency 1 brown not assigned
- externally 2 white Clock input +
supplied 3 blue Clock input -
4 black not assigned
Pt 100 1 brown not assigned
(*** see 2 white Process actual 1 (current feed)
note) 3 blue Process actual 3 (GND)
4 black
Process actual 2 (compensation)
*
The indicated colors refer to the connection cable available as an
accessory (92903474).
** Can be adjusted via software (see operating instructions
Type 8692/8693 "Setting up the process controller").
Tab. 11: X5 - M8 circular connector, 4-pole (process actual value) -
Type 8693
30
Switch
Switch
on left
Switch
on right
Switch
on left
Switch
on right
Switch
on right
English
Type 8692, 8693
Electricalinstallation
X6 - M12 circular connector, 4-pole
Pin Wire color* Assignment
1 brown Operating voltage +
3 blue Operating voltage
* The indicated colors refer to the connection cable available as an
accessory (918038).
X6 - M12 circular connector, 4-pole (operating voltage)
*** For reasons of wire resistance compensation, connect
the Pt 100 sensor via 3 wires.
Always bridge Pin 3 and Pin 4 on the sensor.
24 V DC
GND