Test Procedure; Customer Diagnostics - Dentsply Sirona CEREC AC Notice D'utilisation

10 PC Diagnostic Tool
10.2 Test procedure
72
10.2

Test procedure

10.2.1

Customer Diagnostics

✔
You have started the "Customer Diagnostics" test and the
system configuration is displayed.
1. Using the information in the system configuration, check whether the
system corresponds to the default settings. You can scroll up and
down using the arrow keys.
Tip: The test starts automatically after 3 minutes if you do not press
an arrow key.
2. Press the "Esc" key on the keyboard.
 The test starts. The entire test run takes approx. 30 minutes.
Dentsply Sirona
Operating Instructions for the Acquisition Unit
66 37 461 D 3492
D 3492.201.06.27.02 09.2017