Technical Data; Optional Accessories - Cormach PUMA Manuel D'utilisation Et D'entretien

UK
As well as the manufacturer s details, it carries: Mod. - Machine
model; V - power supply voltage in Volts; A - Current absorp-
tion in Amps; kW - Power absorption in kW; Hz - Frequency in
Hz; Ph - Number of phases; bar - Operating pressure in bar;
Serial N. - Machine serial number; ISO 9001 - Guarantee of
certiication of the company Quality System; CE - CE mark.
WARNING
The data on the nameplate may never be altered or defaced
for any reason.

TECHNICAL DATA

- Overall dimensions (see ig. 4):
• Length ..........................................................A = 1500 mm
• Length ........................................................A1 = 1565 mm
• Width .............................................................B = 955 mm
• Width (with wheel lift) ................................B1 = 1290 mm
• Max width when fully open .........................B2 = 1580 mm
• Height min ................................................... H = 1810 mm
• Height max .................................................. H = 2000 mm
- Tyre types processed .conventional runlat with reinforced
sidewall and/or with internal support
- Wheel dimension range:
• rim diameter ...............................................from 12" to 30"
• maximum tyre diameter ..............................1200 mm (47")
• maximum tyre width ...... 15" (from wheel support surface)
- Turntable:
• rest ........................................................................ langed
• centring ................................................................ on cone
• clamping .............................................mechanical-manual
• drive system ...........................2-speed motor-inverter unit
• rotation torque .....................................................1100 Nm
• rotation speed ...................................................7 - 18 rpm
- Bead Breaker Unit:
• tool .............................................................................disc
• positioning in relation to rim ........manual with mechanical
clamping
• penetration ............................................................. guided
• maximum bead breaking range A = 670 mm (see diagram)
• bead breaker stroke ............. B = 540 mm (see diagram)
• bead breaking cylinder force .................................7600 N
- Wheel lift:
• operation ............................automatic lifting/manual tilting
• drive ..................................................................pneumatic
• lifting capacity ...........................................................85 Kg
- Power supply:
• electric 1 Phase .......................230V-0.75 kW 50Hz/60 Hz
• electrical 1 Phase (alternative) 110V-0.75 kW 50Hz/60 Hz
• pneumatic operating pressure ............................ 8÷9.5 bar
- Weight ............................................310 kg (with wheel lift)
- Noise level
• Weighted noise level A (LpA) in working position ..< 70 dB
(A)
The stated noise levels are emission levels and do not nec-
essarily represent safe operating levels. Although there is a
relationship between emission levels and exposure levels,
this cannot be used reliably to establish whether or not further
precautions are necessary. The factors which determine the
level of exposure to which the operator is subjected include
the duration of the exposure, the characteristics of the work-
place, other sources of noise, etc. The permitted exposure
levels may also vary from country to country. However, this
information will enable the machine s user to make a more
accurate evaluation of the hazard and risk.
30
TOP

OPTIONAL ACCESSORIES

For the full list of optional accessories for the PUMA TYRE
CHANGER, refer to the "ORIGINAL ACCESSORIES" handbook
supplied with the machine.
BEAD BREAKER
STROKE
MAXIMUM BEAD BREA-
KER RANGE