General Information; Technical Data; General Safety Regulation; Safety Devices - Cormach FT 26S Manuel D'utilisation Et D'entretien

1. GENERAL INFORMATION
This tyre changer has been specifically designed to demount and mount truck, bus and commercial van tyres with rims
from 14" to 26" and a maximum 1500 mm diameter.
Any other use is improper and therefore not authorized. Before beginning any kind of work on or
with this machine, carefully read and understand the contents of these operating instructions.
The manufacturer shall not liable for any injury to persons or damage to things caused by improper use of this machine.
KEEP THIS MANUAL NEAR THE MACHINE AND CONSULT IT AS NEEDED DURING OPERATIONS.
2. TECHNICAL DATA
Pump motor
Gearbox motor
Handle rim from
Max. wheel diameter
Max wheel width
Weight (with standard accessories)
Acoustic pressure level (at work)
3. GENERAL SAFETY REGULATION
The use of this machine is reserved to specially trained and authorized personnel. Any unauthorized changes or
modifications to the machine, in particular to its electric system, relieve the manufacturer from all liability.
Removing or tampering with the safety devices installed on this machine is in violation of European Safety Regulations.
Any work, however minor, on the electric system must be done exclusively by professionally qualified personnel.
4. SAFETY DEVICES
The tyre changer has a number of safety devices designed to guarantee the utmost operator safety:
1 – Check valve on the spindle opening hydraulic line (inside the swivel connector, see picture F4.1). This prevents the wheel from
falling from the spindle if the hydraulic line is accidentally broken.
Picture F4.1
2 – Pilot operated dual seal check valve (see picture F4.2). This prevents the spindle carrier arm from dropping if the hydraulic circuit
accidentally breaks.
Picture F4.2
3 – Pressure relief valve factory set at 130 bar ± 5% (See picture F4.3).
This limits the pressure in the hydraulic circuit and ensure correct operation of the plant.
Manuale/Manual/Manuel/Handbuch/Manual – 07/2014
1,1 kW
1,8 kW
14" ÷ 26"
1500 mm – 59"
1000 mm – 39"
700 Kg.
LpA < 70 dbA
Pagina 31