Cormach PUMA Manuel D'utilisation Et D'entretien page 31

UK
C - d /
emounting mounting unit funCtional Control
C1- Demount head control
As a diagram beside the control indicates, this lever is used to
engage the bead before demounting, both for the irst and then
for the second bead.
C2 - Control for locking the demount head in the ideal position
Once the head has been placed in the ideal position, operating
this control locks it in place.
d - b
ead breaker unit tilting Control
D1-
The control on the bead breaking unit tilting handle provides
pneumatic release of the unit.
As long as the button is pressed the bead breaker unit is
released and can be tilted using the handle.
e - t
urntable and deflation pedal Control unit
E1 - Tyre inflation pedal
Press with the Doyfe union of the inlation line itted to the
valve to deliver air into the tyre and inlate it.
E2 - Turntable rotation pedal
This pedal starts rotation of the turntable to which the wheel is
ixed. The pedal has 4 different positions, providing 4 different
rotation speeds.
1. Pedal raised (without detent): slow anti-clockwise rotation.
2. Pedal in rest position (with detent): turntable at a standstill.
3. Pedal pressed slightly down (without detent): slow clockwise
rotation.
4. Pedal pressed right down (without detent): fast clockwise
rotation.
f - w (
heel lift optional
F1 -
Pedal pressed (without detent): wheel lifting, operation on
"hold-to-run" principle.
F2 -
Pedal pressed (without detent): wheel descent, operation on
"hold-to-run" principle.
k
ey to danger warning deCals
Risk of crushing.
Never insert any part of the body, and
in particular hands, between the bead
breaker disc or demount/mount tools and
the wheel.
a hand between the turntable and the
wheel.
Never insert any part of the body be-
tween the wheel lift and other compo-
nents with which it comes into contact.
32
)
pedal Control unit
Never insert
Risk of crushing.
NEVER stand behind the machine. Only
one operator may operate and use the
machine.
NEVER stand or pass beside the machine
when in operation.
The tool arm and bead breaking unit
swing sideways
Impact hazard.
Take care not to knock your head against
the bead breaking arm.
Impact hazard.
Take care not to knock your head or any
other part of your body
against the arm during extension.
Risk of crushing.
Never insert any part of the body, and
in particular hands,
between the demount/mount tool and the
wheel.