Changing The Preset Values; Cancelling The Post-Drying Programme; Switching Off Functions - Sentiotec Pro C3 Instructions D'installation Et D'utilisation

Instructions for use for the user

10.11. Changing the preset values

You can change the preset values at any time during operation.
1. Turn the function selector 2 to the function you want to change.
2. Use the intensity selector 3 to set the preferred preset value.

10.12. Cancelling the post-drying programme

after the combi-mode, the post-drying programme is started automatically.
This involves heating the sauna room to 80 °C with the fan running for 30 min-
utes. In the intensity display 4, the text "dry" is displayed and the temperature
symbol flashes.
● Press and hold down the intensity selector 3 for a second to cancel the
post-drying programme.
To prevent mould and rot from forming, the post-drying programme should
NOT be cancelled.

10.13. Switching off functions

You can switch off each function individually.
1. Turn the function selector 2 to the function you want to switch off.
► The intensity selector 3 lights up.
2. Press the intensity selector 3.
► This respective device is switched off.
► The light on the intensity selector 3 goes out.
If you switch off the sauna heater (temperature function A), the evapora-
tor (humidity function B) is automatically switched off.
WORLD OF WELLNESS
p. 42/52