Intended Use; Restrictions; Possible Errors In Use - Burkert 2300 Instructions De Service

2. inTended use
incorrect use of the angle seat control valve type 2300 may be
a hazard to people, nearby equipment and the environment.
• The device is designed for the controlled flow of liquid and
gaseous media. Operation is possible only in combination with a
suitable activation unit.
• The admissible data, the operating conditions and conditions of
use specified in the contract documents, operating instructions and
on the rating plate are to be observed during use. The designated
application cases are specified in the chapter entitled "Product
description".
• The device may be used only in conjunction with third-party devices
and components recommended and authorised by Bürkert.
• Correct transportation, correct storage and installation and careful
use and maintenance are essential for reliable and problem-free
operation.
• Use the device only as intended.
2.1.

restrictions

If exporting the system/device, observe any existing restrictions.
6
english
Type 2300

Intended Use

2.2. possible errors in use
• Supply the media connections only with those media which are
specified as flow media in the chapter entitled "Technical Data".
• Do not put any loads on the valve (e.g. by placing objects on it or
standing on it).
• Do not make any external modifications to the valves.
the housing parts or screws.
• The actuator housing must not be opened. If opened, there is a risk
of injury from the tensioned spring inside.
Do not paint