Intended Use; Restraints; Foreseeable Misuse - Burkert 8071 Manuel Utilisateur

2.

inTended use

use of low flow sensor that does not comply with the instruc-
tions could present risks to people, nearby installations and
the environment.
• The 8071 flow sensor is intended to measure the flow rate of
fluids, especially of viscous fluids.
• Protect this device against electromagnetic interference,
ultraviolet rays and, when installed outdoors, the effects of the
climatic conditions.
• Use the device in compliance with the specifications and condi-
tions of commissioning and use given in the contractual docu-
ments and in this user manual.
• Safe and trouble-free operation of the device depends on its
proper transport, storage and installation, as well as careful
operation and maintenance.
• Only use this device as intended.
2
english
Type 8071
Intendeduse
2.1.

Restraints

Observe any existing restraints when the device is exported.
2.2.

Foreseeable misuse

• Do not use the device in an explosive atmosphere.
• Do not use fluid that is incompatible with the materials from which
the device is made.
• Do not use this device in an environment incompatible with the
materials from which it is made.
• Do not use this device to measure gas flow rates.
• Do not subject the device to mechanical loads (by placing objects
on top of it or by using it as a step, for example).
• Do not make any external modifications to the device. Do not paint
or varnish any part of the device.