Product description
4.2.
Warranty Terms
This document does not offer any form of warranty. Please refer to our
general terms of sales and business.
The warranty is only valid if the device is used as intended in accordance
with the specified application conditions.
The warranty extends only to defects in the angle seat control
valve Type 2300 and its components.
We accept no liability for any kind of consequential damage
which could occur due to failure or malfunction of the device.
4.3.
licences
The approval mark indicated on the Bürkert rating plates refers to
Bürkert products.
4.4.
information on the internet
The operating instructions and data sheets for Type 2300 can be found
on the Internet at:
www.burkert.com
Documentation
Type 2300
There is also complete documentation on CD.
The complete operating instructions can be ordered by quoting the
following identification number: 00805626
Type 2300
Manuals / Data sheets
5.
prOducT descripTiOn
5.1.
general description
The 2/2-way angle seat control valve Type 2300 is suitable for liquid
and gaseous media.
It uses neutral gases or air (control media) to control the flow of
water, alcohol, oil, fuel, hydraulic fluid, saline solution, lye, organic
solvent and steam (flow media).
The operation of the angle seat control valve Type 2300 is possible
only in combination with an activation unit. Possible activation units
are:
Position controller Type 8692 and 8696
Process controller Type 8693
5.2.
properties
•
Direct installation of the position controllers Type 8692/8696 or
the process controller Type 8693.
•
High tightness by self-adjusting stuffing boxes (spindle sealing
element).
•
Closes tightly when using the PTFE control cone.
•
High flow values by the streamlined valve housing made of
stainless steel.
•
Simple and fast replacement of the control cone.
•
Actuator can be rotated steplessly through 360°.
•
Maintenance-free under normal conditions.
english
9