Intended Use; Basic Safety Instructions - Burkert 2000 Instructions De Montage

Type 2000, 2002, 2012
2030, 2031, 2032, 2033

Intended Use

2. InTended uSe
The actuators and their accessory parts may only be used in the
application cases described and set down in the respective oper-
ating instructions, and only in connection with third-party devices
or components recommended or permitted by Bürkert.
Any other use is not considered the intended use.
Observe the directions of this assembly manual as well as the
conditions of use and permissible data specified in the operating
instructions and on the type plate of the components used.
The proper function and safe operation of the system depends on
professional transportation, professional storage and installation,
and careful operation and maintenance.
All manuals and user guides at all-guides.com
3.
These safety instructions do not make allowance for any
•
•
danger – high pressure!
•
risk of electric shock!
•
•
BaSIc SafeTy
InSTrucTIonS
contingencies and events which may arise during the installation,
operation and maintenance of the devices.
local safety regulations – the operator is responsible for observing
these regulations, also with reference to the installation personnel.
DAnger!
Before loosening the lines and valves, turn off the pressure and
vent the lines.
Before reaching into the system, WAFitch off the voltage and
secure to prevent reactivation!
Observe applicable accident prevention and safety regulations
for electrical equipment!
english
5